Swing Arm Fire Hose Reel

Swing type Fire Hose reel with 19mm hose, 36 metres long. Comes complete with wall mounting, brass nozzle (jet and spray) and 25mm shut off valve. Full centre drum spindel, stainless steel waterway, stainless steel bolts, heavy duty connection block. Click small picture to the left to see details of the swing arm bracket

Swing arm fire hose reels are mounted so that they swing out and allow the fire hose to unspool in the direction the user is pulling it. Making for a smoother reel operation.

The Australian Standard specifies that the swing arm mechanism can withstand a load test before certification. The swing type fire hose reel must not be modified, repaired, or dismantled, as such action would nullify the AS1221 product certification.

Swing Fire hose reels must be maintained in accordance with AS1851.2 ‘Maintenance Of Fire Reel Protection Equipment - Part 2 Fire Hose Reels’ or NZS 4503. All 6 monthly and 12 monthly inspections and service should be carried out by qualified and experienced personnel who are familiar with AS1851.2 requirements for maintenance records and tagging. We can do this service for you.

These fire hose reels conform to AS/NZ 1221:1997 and should be installed to AS2441.2005

Read more about the Australian Standards for fire hose reels

Minimum discharge rate of 0.45 Litres per second
Test pressure 2.0 Mpa

Size 480mm x 300mm
Height of mounting bracket - 246mm
Length of arm from wall mount to end of ring (furthest point) - 300mm

Also available
- a door-mounted swing fire hose reel in cabinet