Swing type Fire Hose reel with 19mm hose, 36 metres long. Mounted in a special swing arm fire hose reel cabinet. Comes complete with wall mounting, brass nozzle (jet and spray) and 25mm shut off valve. Full centre drum spindel, stainless steel waterway, stainless steel bolts, heavy duty connection block. Inlet coupling is easily accessible from the bottom of the cabinet.

Swing arm fire hose reels are mounted so that they swing out and allow the fire hose to unspool in the direction the user is pulling it. Making for a smoother reel operation.

The Australian Standard specifies that the swing arm mechanism can withstand a load test before certification. The swing type fire hose reel must not be modified, repaired, or dismantled, as such action would nullify the AS1221 product certification.

Swing Fire hose reels must be maintained in accordance with AS1851.2 ‘Maintenance Of Fire Reel Protection Equipment - Part 2 Fire Hose Reels’ or NZS 4503. All 6 monthly and 12 monthly inspections and service should be carried out by qualified and experienced personnel who are familiar with AS1851.2 requirements for maintenance records and tagging. We can do this service for you.

These fire hose reels conform to AS/NZ 1221:1997 and should be installed to AS2441.2005

Read more about the Australian Standards for fire hose reels

Minimum discharge rate of 0.45 Litres per second
Test pressure 2.0 Mpa
Working pressure 1500KPa
Cabinet size: 700mm x 800mm x 400mm deep
Paint finish: Epoxy Powder red, 70 micron min
Material: Mild steel 1.2mm thick

Also available- a door-mounted fire hose reel in cabinet

$660.00 inc GST